← Back to the Ami site

Installation example · Fitness club

Training Temple.

One fitness club, three sound worlds — the Weight Room, Bike Training and Zumba Fitness.

Each with its own source, control and speakers; at the center of it all, a single Ami08D matrix.

1× Ami08DThe matrix, at the core
2Nexus wall panels
4Dante wall interfaces
14Speaker points

The plan

The installation blueprint.

Hover to see each element's role, click to open its product page.

Network and Dante enter each zone from the left; the audio comes out on the right.

  • Orange — network + Dante
  • Blue — audio (line)
  • Red — audio (amplified)

The worlds

Three rooms, three moods, one matrix.

Room 1

Weight Room

Background music arrives from the WEBRADIO130App (DAB+, FM or Spotify), enters the Ami08D on a line input, comes back out to the AMP300.1H and carries eight CHP630 ceiling speakers across the entire room.

Room 2

Bike Training

The coach's sources enter over Dante through the wall interfaces; the WA-4X3 powers two SLINE110B speakers backed by two subwoofers. The Nexus5 runs the zone.

Room 3

Zumba Fitness

The same Dante wall inputs, on-wall control via AmiCTL1, and a direct line feed to two MOJO2000Live active column speakers.

Control

An interface in the Temple's image.

In AmiControl, the installer visually builds the control interface the end user will see: client logo, wallpaper, colors, layout of the elements.

At the Training Temple, the Weight Room's Nexus8 embraces all three worlds; the Bike Training's Nexus5 shows only its own zone.

Discover the Nexus range

Nexus8 wall-mounted tablet showing the Training Temple AmiControl interface in three columns: on the left, Bike Training in yellow (ON / OFF, Bluetooth, Mic, volume), in the center the Training Temple logo "Discipline · Détermination · Progrès" then Background in blue with its volume and level meter, on the right Zumba Fitness in pink (ON / OFF, Music, Bluetooth, Mic, volume)
Nexus8 — three worlds on a single screen
The Nexus8 mounted on the wall at the entrance to the Zumba Fitness room: dancers warm up under the pink neon lights, facing the mirrors, on the hardwood floor
On the wall — it runs all three rooms
Nexus5 wall-mounted tablet showing the AmiControl interface for the Bike Training room: mood visual, zone Mute button, Bluetooth and Mic sources, volume control — all in yellow, matching the zone's colors
Nexus5 — a single zone
The Nexus5 mounted on the wall at the Bike Training entrance, lit by a spotlight; through the doorway, the exercise bikes and mats lined up in the half-light of the room
On the wall, at the Bike entrance

The matrix

Dante

Ami08D — the heart of the project.

Every source comes in — streaming, Bluetooth, mics — and every zone goes out.

8×8 matrix routing, per-input and per-output DSP, an 8×8 Dante interface linking the rooms over a single network cable, and the complete control ecosystem: Nexus wall panels, AmiCTL controllers, the AmiControl app.

8×8 matrix Dante 8×8 Ref. H11875

View the Ami08D product page

The equipment

The products in this installation.

One matrix at the center, three rooms around it — each zone with its own amp, speakers and control. The wall controllers are covered in detail above.

Technical roomWEBRADIO130App

Music source

WEBRADIO130App

DAB+, FM and Spotify — the source shared by all three rooms.

View the product page
Bike TrainingWA-4X3

4-channel amplifier

WA-4X3

It powers the two SLINE110B speakers and the two subwoofers.

View the product page
Bike TrainingNexus5

Wall touch panel

Nexus5

5.5″ portrait — control for the Bike Training zone alone.

View the product page
Zumba Fitness2× MOJO2000Live

Active column speakers

2× MOJO2000Live

The active column speakers, fed with a direct line signal.

View the product page