Ecosystem · Dante wall interface
AmiD4.
The AmiD4 is the Ami range’s wall box for bringing mic or line sources straight into a Dante network, while feeding a local sound system from the very same point.
Its 2 balanced combo inputs — with up to 20 dB of adjustable gain and 48 V phantom power switchable per channel — handle condenser microphones and line sources alike. Its 2 balanced XLR outputs can feed a local playback system in parallel.
Dante signal routing is handled from the Dante Controller software. Powered over PoE 802.3af through a single network cable, it requires a PoE switch on the network to operate. Compatible with the Dante versions of every matrix in the Ami range.
Dante wall interface
Key features.
- 2 balanced mic / line combo inputs
- 48 V phantom power per channel, independently switchable
- Input gain adjustable up to 20 dB
- 2 balanced XLR line outputs — local audio playback
- Dante conversion, 2 channels in / 2 channels out
- Routing via the Dante Controller software
- Compatible with the Dante versions of the whole Ami range
One single network cable — Dante and PoE 802.3af power over the same RJ45
AmiD4
Technical specifications.
- ReferenceH11880
- Analog channels in / out2 × 2
- Maximum analog gain20 dB
- Frequency response20 Hz – 20 kHz ±0.2 dB
- Maximum level+18 dBu balanced
- Phantom power48 V
- THD0.002 % @ 4 dBu
- Noise floor-97 dBu
- Input impedance20 kΩ
- Output impedance100 Ω
- Channel isolation @ 1 kHz100 dB
- Power supplyPoE IEEE 802.3af — PoE switch required
- Power consumption< 5 W
- Dimensions95 × 110 × 50 mm
- Weight345 g
Ecosystem
