Ecosystem · Dante wall interface

AmiD2.

Wall-mounted Dante interface with Bluetooth and stereo RCA input for Ami series matrices.

Bluetooth 5.0 with priority over the stereo RCA input, conversion to 2 Dante channels with latency under 2 ms, touch-sensitive pairing button with visual feedback, configured via Ami BT Control.

PoE powered over a single network cable — a PoE switch is required on the network. Compatible with the Dante versions of every matrix in the Ami range.

Bluetooth 5.0Priority over the RCA input

2Dante/AES67 channels

< 2 msDante/AES67 latency

PoE48 V max. power supply

Dante wall interface

Key features.

White AmiD2 wall interface: touch-sensitive Bluetooth pairing button with PAIR marking, white and red stereo RCA inputs — **White** — H11881

Black AmiD2 wall interface, same controls on a black plate — **Black** — H11893

Bluetooth 5.0 — priority over the RCA input
Stereo RCA input as an alternative
2-channel Dante conversion — 44.1/48 kHz / 24-bit
Dante/AES67 latency: < 2 ms
Touch-sensitive pairing button + visual connection and signal feedback
Configured via the Ami BT Control software
Compatible with the Dante versions of the whole Ami range

Description

Bluetooth and RCA, straight into your Dante network.

The AmiD2 converts a Bluetooth 5.0 or stereo RCA signal into a Dante audio stream, feeding it straight into the installation’s network from any point on site.

Flush-mounted in the wall and PoE powered over a single network cable, it is configured from the Ami BT Control software. The Bluetooth signal takes priority over the RCA input.

Rear of the white AmiD2: the flush-mounted module and its single RJ45 port, carrying both the Dante network and PoE power — **White** — H11881

Rear of the black AmiD2, same module and same RJ45 port — **Black** — H11893

One single network cable — Dante and PoE power over the same RJ45

Pairing and security, managed from the software.

The touch-sensitive button on the front panel handles Bluetooth pairing and shows the connection and incoming-signal status in real time. The Bluetooth name and password can be changed remotely from Ami BT Control for secure management of user access.