The Ami04D — the same matrix, with the network built in.
The Ami04D is the Dante version of the Ami04: same 4×4 analog connectivity, same DSP features and AmiControl software, plus an independent 4×4 Dante interface — 4 additional digital audio channels over a single RJ45 cable.

A compact matrix, ready to install.
The Ami04D is a 4×4 digital audio matrix in a half-rack 1U format, supplied with its rack-mount brackets for immediate integration into any rack or technical cabinet. Its 4 balanced inputs and 4 balanced outputs on Euroblock connectors, its input gain adjustable up to 48 dB and its 48V phantom power let you connect microphones, line sources and amplifiers with no additional adaptation. Powered over PoE or via 12V DC, it installs with no mains-wiring constraint, even in the tightest spaces.

A powerful DSP for tailor-made processing.
The Ami04D features an ADI SHARC 21489 processor and a fully configurable DSP through AmiControl. Ducker and Talk Over to manage source priorities, Expander and Gate to clean up the signal, compressor and AGC to control dynamics, ANC for echo and ambient-noise cancellation, anti-feedback, parametric and graphic equalisers, delay up to 408 metres — each input and each output gets independent, precise processing. 16 exportable presets to replicate a setup identically across several sites in seconds.

An interface tailored to your client.
From AmiControl (Windows), the installer visually builds the end-user control interface on Windows, Android and iOS: faders, buttons and source selectors in a fully custom graphic environment — client logo, wallpaper, colours. User-rights management defines exactly what each account can access: volume ranges, fader groups, visible functions.

Professional connectivity and protocols.
All inputs and outputs are balanced on Euroblock connectors for a clean, adapter-free installation. The built-in 2 in / 2 out USB soundcard (48K / 24-bit) enables direct recording from the matrix. Third-party control and integration run over RS232, RS485 and UDP, with a command-capture tool built into AmiControl.

Technical specifications

Processor: ADI SHARC 21489 (×1)
Analog inputs: 4
Analog outputs: 4
Dante interface: 4×4 independent
Dante network port: Dante/AES67 — PoE
Sampling rate: 48 kHz / 24-bit
Input gain: 0 to 48 dB (3 dB steps)
Phantom power: 48V (10 mA max.)
Frequency response: 20 Hz – 20 kHz ±0.5 dB
Max input / output level: +18 dBu
THD: 0.003% @ 1 kHz, +4 dBu
Input / output dynamic range: 110 dB / 112 dB
Background noise (A-weighted): -91 dB
CMRR @ 60 Hz: 80 dB
Channel isolation @ 1 kHz: 108 dB
Input impedance: 5.4 kΩ
Output impedance: 600 Ω
System latency: < 3 ms
Analog connectors: Balanced Euroblock
USB soundcard: 2 in / 2 out — 48K / 24-bit
Control protocols: RS232, RS485, UDP
Power supply: PoE IEEE 802.3af or 12V DC
Max power consumption: 10 W
Format: Half-rack 1U
Dimensions: 241 × 130 × 45 mm
Weight: 1.1 kg
Supplied accessories: 12V DC power supply, Euroblock connectors, 19″ rack bracket, USB-A/USB-C cable