One cable for data and power.
The PoE10-250 connects and powers any PoE-compatible network device in a single move: IP cameras, IP telephony, or audio, Dante and Public Address equipment. Each RJ45 port carries both data and current, up to 30 W per port, for a 250 W total budget shared across the eight ports. No mains adapter behind every unit, no separate power wiring to run.
A natural fit in a Dante network.
The PoE10-250 slots straight into a Dante installation: its 20 Gbps non-blocking switching and MDI/MDI-X auto-sensing guarantee lossless networked audio transport, while PoE power for compatible interfaces and endpoints simplifies deployment across a whole site.
Enough power for the whole installation.
With 250 W shared across its eight ports and up to 30 W available per port, the PoE10-250 powers a large number of devices at once, from the lightest (controllers, interfaces) to the most demanding, without splitting the installation over several switches or keeping a close eye on the remaining power budget.
The natural companion to an Ami system.
The whole Ami range connects to it directly: matrices, AmiCTL1 and AmiCTL2 wall controllers, AmiD2 and AmiD4 Dante interfaces. Nexus touch panels work on the same principle. A single network cable behind each plate is all it takes.
Rugged and easy to integrate.
IEEE 802.3at, MDI/MDI-X auto-sensing and self-adaption, full or half duplex, 20 Gbps non-blocking switching. Cat 5e cable minimum. Compact 1U housing, supplied with its 19″ mounting brackets.
Key features.
- 8 PoE ports, 10/100/1000 Mbps, up to 30 W per port
- 2 RJ45 uplink ports, data only
- 250 W total PoE power budget
- IEEE 802.3at, 48 V supply, mode A
- MDI/MDI-X auto-sensing, full/half duplex
- 20 Gbps non-blocking switching
- Cat 5e cable minimum
- Compatible with any standard PoE device: IP cameras, IP telephony, Dante and Public Address equipment, Aio and Ami ranges, Nexus touch panels
Technical specifications.
- PoE ports: 8 × RJ45 10/100/1000Base-T(X)
- Uplink ports: 2 × RJ45 10/100/1000 Mbps (data)
- Maximum power per port: 30 W (IEEE 802.3at)
- Total power: 250 W
- Wiring method: mode A, data and power, 1/2 (+) and 3/6 (−)
- PoE voltage: 48 V
- Cable: Cat 5e minimum
- Transmission rate: 10 / 100 / 1000 Mbps
- Switching capacity: 20 Gbps non-blocking
- Protocols: IEEE 802.3, 802.3i, 802.3u, 802.3ab, 802.3z, 802.3x
- Power supply: AC 110 – 240 V, 50 / 60 Hz
- Standby consumption: < 18 W
- Operating temperature: 0 – 40 °C
- Dimensions: 270 × 180 × 45 mm
- Weight: 1.25 kg
Packaging content.
- The PoE10-250 switch
- An IEC power cord
- A pair of 19″ mounting brackets
