Mic and line, into the Dante network — and back to a local system.
The AmiD4 is the Ami-series wall box for connecting microphone or line sources straight into a Dante network, while feeding a local audio system from the same point. Its 2 balanced combo inputs, with gain adjustable up to 20 dB and per-channel switchable 48V phantom power, accept both condenser microphones and line sources. Its 2 balanced XLR outputs feed a local playback system in parallel.
Routing and compatibility.
Dante signal routing is handled from the Dante Controller software. Powered over PoE 802.3af via a single network cable (PoE switch required). Compatible with the Dante versions of every matrix in the Ami series.
Technical specifications
- Analog channels in / out: 2 × 2
- Max analog gain: 20 dB
- Frequency response: 20 Hz – 20 kHz ±0.2 dB
- Max level: +18 dBu balanced
- Phantom power: 48V
- THD: 0.002% @ 4 dBu
- Background noise: -97 dBu
- Input impedance: 20 kΩ
- Output impedance: 100 Ω
- Channel isolation @ 1 kHz: 100 dB
- Power supply: PoE IEEE 802.3af — PoE switch required
- Consumption: < 5W
- Dimensions (W × H × D): 95 × 110 × 50 mm
- Weight: 345 g
- Colour: Black
