The Ami08D — the same matrix, with the network built in.
The Ami08D is the Dante version of the Ami08: same 8×8 analog connectivity, same DSP features and AmiControl software, plus an independent 8×8 Dante interface — 8 additional digital audio channels over a single RJ45 cable.
A rack matrix, ready to install.
The Ami08D is an 8×8 digital audio matrix in a 19″ 1U rack format, with integrated brackets for immediate mounting. Its 8 balanced inputs and 8 balanced outputs on Euroblock connectors, its input gain adjustable up to 48 dB and its 48V phantom power let you connect microphones, line sources and amplifiers with no adaptation. The front-panel display shows the matrix IP address, its name and the input/output VU-meters.
A powerful DSP for tailor-made processing.
The Ami08D features an ADI SHARC 21489 processor and a fully configurable DSP through AmiControl: Automix, echo and ambient-noise cancellation, parametric and graphic equalisers, delay, gate, compressor, limiter — independent, precise processing on each input and output. 16 exportable presets to replicate a setup identically across several sites in seconds.
An interface tailored to your client.
The Ami08D is configured from AmiControl on Windows, then controlled day to day from Windows, Android or iOS. The installer freely builds the end-user interface: accessible functions, custom design with the client’s logo and colours, fader and button layout to match real needs.
Connectivity, GPIO and professional protocols.
Built-in 2 in / 2 out USB soundcard for direct recording. The 8 GPIOs, configurable as inputs or outputs, open the door to automation, sensors and third-party equipment. Control runs over RS232, RS485 and UDP.
Technical specifications
- Processor: ADI SHARC 21489 (×1)
- Analog inputs: 8
- Analog outputs: 8
- Dante interface: 8×8 independent
- Dante network ports: 2 — primary + secondary
- Sampling rate: 48 kHz / 24-bit
- Input gain: 0 to 48 dB (3 dB steps)
- Phantom power: 48V (10 mA max.)
- Frequency response: 20 Hz – 20 kHz ±0.3 dB
- Max input / output level: +18 dBu
- THD: < 0.003% @ 4 dBu
- Input / output dynamic range: 110 dB / 112 dB
- Background noise (A-weighted): -91 dB
- CMRR @ 60 Hz: 80 dB
- Channel isolation @ 1 kHz: 108 dB
- Input impedance: 5.4 kΩ
- Output impedance: 600 Ω
- System latency: < 3 ms
- Analog connectors: Balanced Euroblock
- GPIO: 8 configurable inputs / outputs
- USB soundcard: 2 in / 2 out — 48K / 24-bit
- Control protocols: RS232, RS485, UDP
- Power supply: AC 110–240V, 50/60 Hz
- Max power consumption: 30 W
- Format: 19″ 1U rack
- Dimensions: 482 × 260 × 45 mm
- Weight: 2.8 kg
- Supplied accessories: CE power cable, Euroblock connectors, USB-A/USB-C cable
