– 2 analog microphone or line inputs
– Box name can be renamed via
– XLR or RCA connection
– 2 balanced analog outputs on rear terminal block
– Microphone sensitivity adjustment
– Phantom power switch
– Signal and clip indicator LEDs for inputs and outputs
– RD port for connection to digital channels 9/10, 11/12 of the DZ-MATRIX* matrix.
*Use CAT5e or CAT6 cable up to 100 m long.
⚠ Recommendations — firmware update (15/06/2026)
- All products in the DZ series must be updated to work properly.
- For updates, all your devices must be connected.
- You cannot use the V3.0.0 Setting Software with the DZ-MATRIX V6.3II.
- You cannot use the V2.0.8 Setting Software with the DZ-MATRIX V7.1II.
What’s new
DZ-MATRIX:
- DSP copy to inputs and outputs linked in stereo
- “Clear all” added in the matrix module + single-click routing
- Save and load equalisation presets on outputs
- Added groups (4 for inputs, 4 for outputs)
- Option to choose a default preset at matrix startup
- IP address configuration (DHCP or fixed IP)
DZ-PAD:
- “VOL-” and “VOL+” buttons added on the OUTPUT page
- Group page added
