One cable for data and power.
The PoE10-250 connects and powers any PoE-compatible network device in a single move: IP cameras, IP telephony, or audio, Dante and Public Address equipment. Each RJ45 port carries both data and current, up to 30 W per port, for a 250 W total budget shared across the eight ports. No mains adapter behind every unit, no separate power wiring to run.

A natural fit in a Dante network.
The PoE10-250 slots straight into a Dante installation: its 20 Gbps non-blocking switching and MDI/MDI-X auto-sensing guarantee lossless networked audio transport, while PoE power for compatible interfaces and endpoints simplifies deployment across a whole site.

Enough power for the whole installation.
With 250 W shared across its eight ports and up to 30 W available per port, the PoE10-250 powers a large number of devices at once, from the lightest (controllers, interfaces) to the most demanding, without splitting the installation over several switches or keeping a close eye on the remaining power budget.

The natural companion to an Ami system.
The whole Ami range connects to it directly: matrices, AmiCTL1 and AmiCTL2 wall controllers, AmiD2 and AmiD4 Dante interfaces. Nexus touch panels work on the same principle. A single network cable behind each plate is all it takes.

Rugged and easy to integrate.
IEEE 802.3at, MDI/MDI-X auto-sensing and self-adaption, full or half duplex, 20 Gbps non-blocking switching. Cat 5e cable minimum. Compact 1U housing, supplied with its 19″ mounting brackets.

Key features.

8 PoE ports, 10/100/1000 Mbps, up to 30 W per port
2 RJ45 uplink ports, data only
250 W total PoE power budget
IEEE 802.3at, 48 V supply, mode A
MDI/MDI-X auto-sensing, full/half duplex
20 Gbps non-blocking switching
Cat 5e cable minimum
Compatible with any standard PoE device: IP cameras, IP telephony, Dante and Public Address equipment, Aio and Ami ranges, Nexus touch panels

Technical specifications.