Home  /  Our products  /  Audio mixers  /  PREZONE642

PREZONE642

Mixer 10 inputs and 2-zone preamp

– 2 totally independent zones
– 6 Mic inputs and 4 line inputs
– Level display per zone and per input
– 24 V safety power supply

Code : H9902 Category:

Le mixer/zoner compact idéal lorsque les sources se multiplient

Résolument tourné vers l'installation professionnelle, le mixer/préampli PREZONE642 propose 6 entrées micros/ligne mono sur XLR ou Jack et 4 entrées stéréo sur RCA ou Jack.

Each area has :

– Its own volume
– His own equalization
– Its own SUB output level setting
– Its own output level display

The headphone section is evolved with:
– A listening selection by channel via a PFL button per channel
– The ability to listen to each output independently via a zone selector.

Chaque entrée peut être envoyée indépendamment vers chacune des deux zones, ou vers les deux simultanément, afin d'offrir un maximum de possibilités. Chaque zone est pourvue d'une sortie SUB filtrée et réglable en volume, et d'un insert pour le placement d'un effet ou d'une protection supplémentaire. Le mixer est équipé d'une section de pré-écoute avec sortie casque permettant le contrôle de chaque zone.

Each microphone input has :

– A gain setting
– 3-band equalization
– These settings are for installation purposes only and can only be changed with a screwdriver

Each line entry offers :

– A gain adjustment. (This setting is for installation purposes only and can only be changed with a screwdriver)

Exemple de configuration

LISTEN TO AUDIOPHONY P.A. PRODUCTS

Trouvez un revendeur agréé Audiophony P.A. près de chez vous.

Features

– 6 mono Mic/Line inputs on XLR/Jack
– Phantom power and priority mic on inputs 1 and 2
– 4 stereo inputs on RCA or Jack
– Priority input on 6.35 jack
– Zone 1 and 2 mono balanced outputs on XLR
– Zone insert on 6.35 TRS jack
– Balanced SUB output per zone on jack
– Stereo REC output on RCA
– Gain and tone control (3 bands) on mic inputs
– Gain control on stereo inputs
– Tone control (2 bands) per zone
– SUB volume control per zone
– Access to dedicated installer settings (via screwdriver)
– Zone and PFL assignment per input channel
– Signal and peak display by LED
– Output level display per zone via 8 LED Vumeter
– Headphone output with volume control (zones and PFL)
– Power supply: 230 V 50/60 Hz
– Power consumption: 16 Watts
– DC24 V backup power supply with Link Out
– Frequency response: 20 Hz – 20 kHz (+/- 3dB)
– H.R.T. (1 kHz nominal power) : < 0.2%
– Equalizer :
– High: +/-12 dB @ 12.5 kHz
– Mid : +/-12 dB @ 2,5 kHz
– Low +/- 12 dB @ 80 Hz
– Dimensions: 295 x 085 x 482 mm
– 19 inch rackmount
– Height : 2 units
– Weight : 5 kg

User manuals

Guide de l’utilisateur

⬇ Guide de l’utilisateur

User guide

⬇ User guide

Gebruikershandleiding

⬇ Gebruikershandleiding

Benutzerhandbuch

⬇ Benutzerhandbuch

Guía del usuario

⬇ Guía del usuario