The Ami04D — the same matrix, with the network built in.
The Ami04D is the Dante version of the Ami04: same 4×4 analog connectivity, same DSP features and AmiControl software, plus an independent 4×4 Dante interface — 4 additional digital audio channels over a single RJ45 cable.

A compact matrix, ready to install.
The Ami04D is a 4×4 digital audio matrix in a half-rack 1U format, supplied with its rack-mount brackets for immediate integration into any rack or technical cabinet. Its 4 balanced inputs and 4 balanced outputs on Euroblock connectors, its input gain adjustable up to 48 dB and its 48V phantom power let you connect microphones, line sources and amplifiers with no additional adaptation. Powered over PoE or via 12V DC, it installs with no mains-wiring constraint, even in the tightest spaces.

A powerful DSP for tailor-made processing.
The Ami04D features an ADI SHARC 21489 processor and a fully configurable DSP through AmiControl. Ducker and Talk Over to manage source priorities, Expander and Gate to clean up the signal, compressor and AGC to control dynamics, ANC for echo and ambient-noise cancellation, anti-feedback, parametric and graphic equalisers, delay up to 408 metres — each input and each output gets independent, precise processing. 16 exportable presets to replicate a setup identically across several sites in seconds.

An interface tailored to your client.
From AmiControl (Windows), the installer visually builds the end-user control interface on Windows, Android and iOS: faders, buttons and source selectors in a fully custom graphic environment — client logo, wallpaper, colours. User-rights management defines exactly what each account can access: volume ranges, fader groups, visible functions.

Professional connectivity and protocols.
All inputs and outputs are balanced on Euroblock connectors for a clean, adapter-free installation. The built-in 2 in / 2 out USB soundcard (48K / 24-bit) enables direct recording from the matrix. Third-party control and integration run over RS232, RS485 and UDP, with a command-capture tool built into AmiControl.

Technical specifications

• Processor: ADI SHARC 21489 (×1)
• Analog inputs: 4
• Analog outputs: 4
• Dante interface: 4×4 independent
• Dante network port: Dante/AES67 — PoE
• Sampling rate: 48 kHz / 24-bit
• Input gain: 0 to 48 dB (3 dB steps)
• Phantom power: 48V (10 mA max.)
• Frequency response: 20 Hz – 20 kHz ±0.5 dB
• Max input / output level: +18 dBu
• THD: 0.003% @ 1 kHz, +4 dBu
• Input / output dynamic range: 110 dB / 112 dB
• Background noise (A-weighted): -91 dB
• CMRR @ 60 Hz: 80 dB
• Channel isolation @ 1 kHz: 108 dB
• Input impedance: 5.4 kΩ
• Output impedance: 600 Ω
• System latency: < 3 ms
• Analog connectors: Balanced Euroblock
• USB soundcard: 2 in / 2 out — 48K / 24-bit
• Control protocols: RS232, RS485, UDP
• Power supply: PoE IEEE 802.3af or 12V DC
• Max power consumption: 10 W
• Format: Half-rack 1U
• Dimensions: 241 × 130 × 45 mm
• Weight: 1.1 kg
• Supplied accessories: 12V DC power supply, Euroblock connectors, 19″ rack bracket, USB-A/USB-C cable

Ami04D

Discover the Ami04D in detail.

Wiring diagrams, DSP in depth, range comparison and real-world use cases — on the page dedicated to the matrix.

Learn more →

The post Ami04D appeared first on Audiophony Public Address.

A rack matrix, ready to install.
The Ami08 is an 8×8 digital audio matrix in a 19″ 1U rack format, with integrated brackets for immediate mounting. Its 8 balanced inputs and 8 balanced outputs on Euroblock connectors, its input gain adjustable up to 48 dB and its 48V phantom power let you connect microphones, line sources and amplifiers with no adaptation. The front-panel display shows the matrix IP address, its name and the input/output VU-meters.

A powerful DSP for tailor-made processing.
The Ami08 features an ADI SHARC 21489 processor and a fully configurable DSP through AmiControl: Automix, echo and ambient-noise cancellation, parametric and graphic equalisers, delay, gate, compressor, limiter — independent, precise processing on each input and output. 16 exportable presets to replicate a setup identically across several sites in seconds.

An interface tailored to your client.
The Ami08 is configured from AmiControl on Windows, then controlled day to day from Windows, Android or iOS. The installer freely builds the end-user interface: accessible functions, custom design with the client’s logo and colours, fader and button layout to match real needs.

Connectivity, GPIO and professional protocols.
Built-in 2 in / 2 out USB soundcard for direct recording. The 8 GPIOs, configurable as inputs or outputs, open the door to automation, sensors and third-party equipment. Control runs over RS232, RS485 and UDP.

The Ami08D — the same matrix, with the network built in.
The Ami08D is the Dante version of the Ami08: same 8×8 analog connectivity, same DSP features and AmiControl software, plus an independent 8×8 Dante interface — 8 additional digital audio channels over a single RJ45 cable.

Technical specifications

• Processor: ADI SHARC 21489 (×1)
• Analog inputs: 8
• Analog outputs: 8
• Sampling rate: 48 kHz / 24-bit
• Input gain: 0 to 48 dB (3 dB steps)
• Phantom power: 48V (10 mA max.)
• Frequency response: 20 Hz – 20 kHz ±0.3 dB
• Max input / output level: +18 dBu
• THD: < 0.003% @ 4 dBu
• Input / output dynamic range: 110 dB / 112 dB
• Background noise (A-weighted): -91 dB
• CMRR @ 60 Hz: 80 dB
• Channel isolation @ 1 kHz: 108 dB
• Input impedance: 5.4 kΩ
• Output impedance: 600 Ω
• System latency: < 3 ms
• Analog connectors: Balanced Euroblock
• GPIO: 8 configurable inputs / outputs
• USB soundcard: 2 in / 2 out — 48K / 24-bit
• Control protocols: RS232, RS485, UDP
• Power supply: AC 110–240V, 50/60 Hz
• Max power consumption: 28 W
• Format: 19″ 1U rack
• Dimensions: 482 × 260 × 45 mm
• Weight: 2.8 kg
• Supplied accessories: CE power cable, Euroblock connectors, USB-A/USB-C cable

Ami08

Discover the Ami08 in detail.

Wiring diagrams, DSP in depth, range comparison and real-world use cases — on the page dedicated to the matrix.

Learn more →

The post Ami08 appeared first on Audiophony Public Address.

The Ami08D — the same matrix, with the network built in.
The Ami08D is the Dante version of the Ami08: same 8×8 analog connectivity, same DSP features and AmiControl software, plus an independent 8×8 Dante interface — 8 additional digital audio channels over a single RJ45 cable.

A rack matrix, ready to install.
The Ami08D is an 8×8 digital audio matrix in a 19″ 1U rack format, with integrated brackets for immediate mounting. Its 8 balanced inputs and 8 balanced outputs on Euroblock connectors, its input gain adjustable up to 48 dB and its 48V phantom power let you connect microphones, line sources and amplifiers with no adaptation. The front-panel display shows the matrix IP address, its name and the input/output VU-meters.

A powerful DSP for tailor-made processing.
The Ami08D features an ADI SHARC 21489 processor and a fully configurable DSP through AmiControl: Automix, echo and ambient-noise cancellation, parametric and graphic equalisers, delay, gate, compressor, limiter — independent, precise processing on each input and output. 16 exportable presets to replicate a setup identically across several sites in seconds.

An interface tailored to your client.
The Ami08D is configured from AmiControl on Windows, then controlled day to day from Windows, Android or iOS. The installer freely builds the end-user interface: accessible functions, custom design with the client’s logo and colours, fader and button layout to match real needs.

Connectivity, GPIO and professional protocols.
Built-in 2 in / 2 out USB soundcard for direct recording. The 8 GPIOs, configurable as inputs or outputs, open the door to automation, sensors and third-party equipment. Control runs over RS232, RS485 and UDP.

Technical specifications

• Processor: ADI SHARC 21489 (×1)
• Analog inputs: 8
• Analog outputs: 8
• Dante interface: 8×8 independent
• Dante network ports: 2 — primary + secondary
• Sampling rate: 48 kHz / 24-bit
• Input gain: 0 to 48 dB (3 dB steps)
• Phantom power: 48V (10 mA max.)
• Frequency response: 20 Hz – 20 kHz ±0.3 dB
• Max input / output level: +18 dBu
• THD: < 0.003% @ 4 dBu
• Input / output dynamic range: 110 dB / 112 dB
• Background noise (A-weighted): -91 dB
• CMRR @ 60 Hz: 80 dB
• Channel isolation @ 1 kHz: 108 dB
• Input impedance: 5.4 kΩ
• Output impedance: 600 Ω
• System latency: < 3 ms
• Analog connectors: Balanced Euroblock
• GPIO: 8 configurable inputs / outputs
• USB soundcard: 2 in / 2 out — 48K / 24-bit
• Control protocols: RS232, RS485, UDP
• Power supply: AC 110–240V, 50/60 Hz
• Max power consumption: 30 W
• Format: 19″ 1U rack
• Dimensions: 482 × 260 × 45 mm
• Weight: 2.8 kg
• Supplied accessories: CE power cable, Euroblock connectors, USB-A/USB-C cable

Ami08D

Discover the Ami08D in detail.

Wiring diagrams, DSP in depth, range comparison and real-world use cases — on the page dedicated to the matrix.

Learn more →

The post Ami08D appeared first on Audiophony Public Address.

A high-capacity rack matrix, ready to install.
The Ami16 is a 16×16 digital audio matrix in a 19″ 1U rack format, with integrated brackets for immediate mounting. Its 16 balanced inputs and 16 balanced outputs on Euroblock connectors, its input gain adjustable up to 48 dB and its 48V phantom power let you connect microphones, line sources and amplifiers with no adaptation. The front-panel display shows the IP address, the name and the input/output VU-meters.

Exceptional processing power.
The Ami16 features two ADI SHARC 21489 processors working together to absorb the most complex configurations without ever faltering. The DSP is fully configurable through AmiControl: Automix, echo and ambient-noise cancellation, parametric and graphic equalisers, delay, gate, compressor, limiter — independent, precise processing on each input and output. 16 exportable presets for effortless multi-site deployment.

An interface tailored to your client.
The installer freely builds the end-user control interface from AmiControl (Windows), then controls it day to day from Windows, Android or iOS: custom design, logo, colours, fader and button layout. Rights management defines each user’s access precisely.

Connectivity, GPIO and professional protocols.
Built-in 2 in / 2 out USB soundcard, 8 configurable GPIOs for automation and third-party integration, control over RS232, RS485 and UDP with a command-capture tool built into AmiControl.

The Ami16D — the same matrix, with the network built in.
The Ami16D is the Dante version of the Ami16: same 16×16 analog connectivity, same DSP features and AmiControl software, plus an independent 16×16 Dante interface — 16 additional digital audio channels over a single RJ45 cable.

Technical specifications

• Processor: ADI SHARC 21489 (×2)
• Analog inputs: 16
• Analog outputs: 16
• Sampling rate: 48 kHz / 24-bit
• Input gain: 0 to 48 dB (3 dB steps)
• Phantom power: 48V (10 mA max.)
• Frequency response: 20 Hz – 20 kHz ±0.3 dB
• Max input / output level: +18 dBu
• THD: < 0.003% @ 4 dBu
• Input / output dynamic range: 110 dB / 112 dB
• Background noise (A-weighted): -91 dB
• CMRR @ 60 Hz: 80 dB
• Channel isolation @ 1 kHz: 108 dB
• Input impedance: 5.4 kΩ
• Output impedance: 600 Ω
• System latency: < 3 ms
• Analog connectors: Balanced Euroblock
• GPIO: 8 configurable inputs / outputs
• USB soundcard: 2 in / 2 out — 48K / 24-bit
• Control protocols: RS232, RS485, UDP
• Power supply: AC 110–240V, 50/60 Hz
• Max power consumption: 28 W
• Format: 19″ 1U rack
• Dimensions: 482 × 260 × 45 mm
• Weight: 3 kg
• Supplied accessories: CE power cable, Euroblock connectors, USB-A/USB-C cable

Ami16

Discover the Ami16 in detail.

Wiring diagrams, DSP in depth, range comparison and real-world use cases — on the page dedicated to the matrix.

Learn more →

The post Ami16 appeared first on Audiophony Public Address.

The Ami16D — the same matrix, with the network built in.
The Ami16D is the Dante version of the Ami16: same 16×16 analog connectivity, same DSP features and AmiControl software, plus an independent 16×16 Dante interface — 16 additional digital audio channels over a single RJ45 cable.

A high-capacity rack matrix, ready to install.
The Ami16D is a 16×16 digital audio matrix in a 19″ 1U rack format, with integrated brackets for immediate mounting. Its 16 balanced inputs and 16 balanced outputs on Euroblock connectors, its input gain adjustable up to 48 dB and its 48V phantom power let you connect microphones, line sources and amplifiers with no adaptation. The front-panel display shows the IP address, the name and the input/output VU-meters.

Exceptional processing power.
The Ami16D features two ADI SHARC 21489 processors working together to absorb the most complex configurations without ever faltering. The DSP is fully configurable through AmiControl: Automix, echo and ambient-noise cancellation, parametric and graphic equalisers, delay, gate, compressor, limiter — independent, precise processing on each input and output. 16 exportable presets for effortless multi-site deployment.

An interface tailored to your client.
The installer freely builds the end-user control interface from AmiControl (Windows), then controls it day to day from Windows, Android or iOS: custom design, logo, colours, fader and button layout. Rights management defines each user’s access precisely.

Connectivity, GPIO and professional protocols.
Built-in 2 in / 2 out USB soundcard, 8 configurable GPIOs for automation and third-party integration, control over RS232, RS485 and UDP with a command-capture tool built into AmiControl.

Technical specifications

• Processor: ADI SHARC 21489 (×2)
• Analog inputs: 16
• Analog outputs: 16
• Dante interface: 16×16 independent
• Dante network ports: 2 — primary + secondary
• Sampling rate: 48 kHz / 24-bit
• Input gain: 0 to 48 dB (3 dB steps)
• Phantom power: 48V (10 mA max.)
• Frequency response: 20 Hz – 20 kHz ±0.3 dB
• Max input / output level: +18 dBu
• THD: < 0.003% @ 4 dBu
• Input / output dynamic range: 110 dB / 112 dB
• Background noise (A-weighted): -91 dB
• CMRR @ 60 Hz: 80 dB
• Channel isolation @ 1 kHz: 108 dB
• Input impedance: 5.4 kΩ
• Output impedance: 600 Ω
• System latency: < 3 ms
• Analog connectors: Balanced Euroblock
• GPIO: 8 configurable inputs / outputs
• USB soundcard: 2 in / 2 out — 48K / 24-bit
• Control protocols: RS232, RS485, UDP
• Power supply: AC 110–240V, 50/60 Hz
• Max power consumption: 30 W
• Format: 19″ 1U rack
• Dimensions: 482 × 260 × 45 mm
• Weight: 3 kg
• Supplied accessories: CE power cable, Euroblock connectors, USB-A/USB-C cable

Ami16D

Discover the Ami16D in detail.

Wiring diagrams, DSP in depth, range comparison and real-world use cases — on the page dedicated to the matrix.

Learn more →

The post Ami16D appeared first on Audiophony Public Address.

Direct access to the essential functions.
The AmiCTL1 is the Ami-series wall controller for users who need immediate access to the key functions of their installation. Six fully programmable buttons and a rotary encoder: the installer decides which functions are accessible — source selection, volume adjustment, preset recall, third-party control over RS232, RS485 or UDP. The level-indicator LEDs give immediate visual feedback.

Installation and compatibility.
Powered over PoE via a single network cable (PoE switch required), it fits a standard flush-mount box. Compatible with every matrix in the Ami series — the number of controllers per matrix is unlimited.

Technical specifications

• Programmable buttons: 6 + 1 rotary encoder
• Indicators: Level LEDs
• Protocol: UDP / TCP-IP
• Third-party protocols: RS232, RS485, UDP
• Power supply: PoE 48V max. — PoE switch required
• Consumption: < 5W
• Max cable length: 100 m
• Connection port: 1 × RJ45
• Dimensions (W × H × D): 86 × 86 × 35 mm
• Weight: 200 g
• Colour: White

AmiCTL1w

Discover the AmiCTL1 in detail.

Interface, customisation and wiring examples: the controller at the heart of the Ami ecosystem.

Learn more →

The post AmiCTL1w appeared first on Audiophony Public Address.

Direct access to the essential functions.
The AmiCTL1 is the Ami-series wall controller for users who need immediate access to the key functions of their installation. Six fully programmable buttons and a rotary encoder: the installer decides which functions are accessible — source selection, volume adjustment, preset recall, third-party control over RS232, RS485 or UDP. The level-indicator LEDs give immediate visual feedback.

Installation and compatibility.
Powered over PoE via a single network cable (PoE switch required), it fits a standard flush-mount box. Compatible with every matrix in the Ami series — the number of controllers per matrix is unlimited.

Technical specifications

• Programmable buttons: 6 + 1 rotary encoder
• Indicators: Level LEDs
• Protocol: UDP / TCP-IP
• Third-party protocols: RS232, RS485, UDP
• Power supply: PoE 48V max. — PoE switch required
• Consumption: < 5W
• Max cable length: 100 m
• Connection port: 1 × RJ45
• Dimensions (W × H × D): 86 × 86 × 35 mm
• Weight: 200 g
• Colour: Black

AmiCTL1b

Discover the AmiCTL1 in detail.

Interface, customisation and wiring examples: the controller at the heart of the Ami ecosystem.

Learn more →

The post AmiCTL1b appeared first on Audiophony Public Address.

Maximum flexibility, on screen.
The AmiCTL2 is the Ami-series wall controller for installations that demand maximum flexibility. Its clickable rotary encoder and 1.31″ OLED display let you navigate up to 32 fully programmable menus from AmiControl. Each function is renamable, its min and max limits are independently adjustable, and the rotation steps are configurable.

Security, installation and compatibility.
A dual password protects access to sensitive settings — one for everyday use, one for advanced settings. Powered over PoE via a single network cable (PoE switch required). Compatible with every matrix in the Ami series, unlimited number of controllers.

Technical specifications

• Display: 1.31″ OLED
• Control: Clickable rotary encoder
• Programmable menus: 32
• Protocol: UDP / TCP-IP
• Power supply: PoE 48V max. — PoE switch required
• Consumption: < 5W
• Max cable length: 100 m
• Connection port: 1 × RJ45
• Dimensions (W × H × D): 86 × 86 × 35 mm
• Weight: 185 g
• Colour: White

AmiCTL2w

Discover the AmiCTL2 in detail.

Interface, customisation and wiring examples: the controller at the heart of the Ami ecosystem.

Learn more →

The post AmiCTL2w appeared first on Audiophony Public Address.

Maximum flexibility, on screen.
The AmiCTL2 is the Ami-series wall controller for installations that demand maximum flexibility. Its clickable rotary encoder and 1.31″ OLED display let you navigate up to 32 fully programmable menus from AmiControl. Each function is renamable, its min and max limits are independently adjustable, and the rotation steps are configurable.

Security, installation and compatibility.
A dual password protects access to sensitive settings — one for everyday use, one for advanced settings. Powered over PoE via a single network cable (PoE switch required). Compatible with every matrix in the Ami series, unlimited number of controllers.

Technical specifications

• Display: 1.31″ OLED
• Control: Clickable rotary encoder
• Programmable menus: 32
• Protocol: UDP / TCP-IP
• Power supply: PoE 48V max. — PoE switch required
• Consumption: < 5W
• Max cable length: 100 m
• Connection port: 1 × RJ45
• Dimensions (W × H × D): 86 × 86 × 35 mm
• Weight: 185 g
• Colour: Black

AmiCTL2b

Discover the AmiCTL2 in detail.

Interface, customisation and wiring examples: the controller at the heart of the Ami ecosystem.

Learn more →

The post AmiCTL2b appeared first on Audiophony Public Address.

Bluetooth and RCA, straight into your Dante network.
The AmiD2 converts a Bluetooth 5.0 or stereo RCA signal into a Dante audio stream, injecting it directly into the installation network from anywhere in the rack. Wall-mountable and powered over PoE via a single network cable, it is configured from the Ami BT Control software. The Bluetooth signal takes priority over the RCA input.

Pairing, security and compatibility.
The front-panel touch button handles Bluetooth pairing and shows the connection and incoming-signal status in real time. Bluetooth name and password can be changed remotely from Ami BT Control for secure access management. Compatible with the Dante versions of every matrix in the Ami series. PoE switch required.

Technical specifications

• Bluetooth: 5.0 — 2.4 GHz — 2.5 mW
• Bluetooth channels: 2
• Dante / AES67 channels: 2
• Stereo input: RCA × 2
• Max input level: 12 dBu
• Sampling rate: 48 kHz / 24-bit
• THD: 0.005% @ 1 kHz + 4 dBu
• Dante / AES67 latency: < 2 ms
• Signal-to-noise ratio: > 100 dB
• Power supply: PoE 48V max. — PoE switch required
• Consumption: < 5W
• Dimensions (W × H × D): 86 × 86 × 40 mm
• Weight: 170 g
• Colour: White

AmiD2w

Discover the AmiD2 in detail.

Connections, Dante network and concrete use cases: the interface at the heart of the Ami ecosystem.

Learn more →

The post AmiD2w appeared first on Audiophony Public Address.